金坛区工地脚手架脚轮测试-滑移测试检测机构

脚手架测试项目：
长度调节装置尺寸测量，钢支撑强度，钢管材料屈服强度，抗拉强度，延伸率，变形量测试，破坏载荷，销钉及支持装置较大载荷，位移，镀锌层厚度，整体结构尺寸，脚轮测试，整体结构较不利载荷组合测试，平台组件受力挠度，护栏受力挠度，垂直组件组合倾斜角度，整体结构刚度测试，平台均布载荷，集中载荷，踏板硬度，强度，滑动，滑移测试。
测试标准：
AS/NZS 1576.3:2015 Scaffolding Part 3: Prefabricated and tube-and-coupler scaffolding
AS/NZS 1576.3:2015 脚手架 *3部分：预制脚手架及钢管扣件脚手架
ANSI/ASSE A10.8-2001 Safety Requirements for Scaffolding-American National Standard for Construction and Demolition Operations 
ANSI/ASSE A10.8-2001 脚手架安全要求-建筑及拆除操作美国国家标准
ANSI/SSFI SC100-5/05  STANDARDS FOR TESTING AND RATING SCAFFOLD ASSEMBLIES ANDCOMPONENTS 
ANSI/SSFI SC100-5/05  脚手架整体和部件测试和分级标准
EN 12811-1:2003 Temporary works equipment Part 1: Scaffolds-Performance requirements and general design
EN 12811-1:2003 临时工作设备 1：脚手架 要求和总体设计
EN 12811-3:2002Temporary works equipment Part 3: Loading test
EN 12811-3:2002 临时工作设备 3：承载测试
CAN/CSA-S269.2-M87:2003 Access scaffolding for construction purposes Structures(Design)
CAN/CSA-S269.2-M87:2003 建筑用脚手架 结构(设计)
EN 1004:2004 Mobile access and working towers made of prefabricated elements — Materials, dimensions, design loads, safety and performance requirements
EN 1004:2004 预制组件制的移动通道和工作塔.材料、尺寸、设计载荷、安全和性能要求
AS/NZS 1576.3:2015 Scaffolding Part 3: Prefabricated and tube-and-coupler scaffolding
AS/NZS 1576.3:2015 脚手架 *3部分：预制脚手架及钢管扣件脚手架
ANSI/SSFI SH300-2007 Standards for Testing and Rating Shoring Equipment  支撑设备测试和分级标准    
PAS 250:2012 Low-level work platform with one working platform with side protection for use by one person with a maximun working platform height of less than 2.5m--Specification
PAS 250:2012 单人用有边部防护栏工作平台高度不过2.5m的低层次单工作平台
AS/NZS 1576.3:2015 Scaffolding Part 3: Prefabricated and tube-and-coupler scaffolding
AS/NZS 1576.3:2015 脚手架 *3部分：预制脚手架及钢管扣件脚手架